SCHNEIDER ELECTRIC ZENL-1111, Contact block (No 3/4) - NEW

Schneider Electric SE Contact block (No 3/4), ZENL 1111

Model: ZENL1111


Product range: Harmony XAL/Harmony XAPS
Product or component type: contact block

Product Specification:
For XB5 Ø22mm control and signaling units
For XAPS control station

Mounting of the block: Rear mounting
Type and composition of contacts: 1S
Positive opening: without

Operating travel:
2.6mm (normally open, alternating electrical state)
4.3mm (total travel)

Operating force: 2.3 N N/O contact, alternating electrical state
Operating torque: 0.05 Nm normally open, alternating electrical state
Mechanical life: 10000000 cycles
Connections-terminals
Screw terminals, <= 2 x 1.5mm² with cable end complies with EN/IEC 60947-1
Screw terminals, >= 1 x 0.22mm² without cable end complies with EN/IEC 60947-1
Tightening torque 0.8-1.2 Nm complies with EN 60947-1
Ambient temperature (storage/operation): -40...+70°C
Protection class: IP20
Electrical data:
3A at 240V AC-15, A600 complies with EN/IEC 60947-5-1
6A at 120V AC-15, A600 complies with EN/IEC 60947-5-1
0.1A at 600V DC-13, Q600 complies with EN/IEC 60947-5-1
0.27A at 250V DC-13, Q600 complies with EN/IEC 60947-5-1
0.55A at 125V DC-13, Q600 complies with EN/IEC 60947-5-1
1.2A at 600V AC-15, A600 complies with EN/IEC 60947-5-1