Cookie的设置
本网站使用Cookie,它为网站技术运营所必需并被始终使用。仅在您同意的情况下使用旨在提高本网站的使用舒适度、提供直接广告或简化与其他网站和社交网络互动的其他Cookie。
配置
技术上的要求
这些Cookies是店铺的基本功能所必需的。
Adyen Cookies
CSRF令牌
Cookie的设置
PayPal-Zahlungen
个人价格
会话
定制化的缓存
拒绝所有Cookies
接受所有Cookies
识别客户
货币兑换
选定的店铺
舒适功能
这些cookie旨在让购物体验更有吸引力,例如识别访客。
愿望清单
统计和跟踪
Clarity
Google Analytics
伙伴方案
终端设备检测
商品编号: | LW29004 |
Product Condition: | Used |
Shipping: | Express delivery available |
Warranty: | 60 days |
Available Stock: | 3 |
Beckhoff Automation GmbH & Co. KG CANopen Compact Bus Terminal Controller, BC5150 Model:... 更多
产品信息 "BECKHOFF BC5150, CANopen Compact Bus Terminal Controller"
Beckhoff Automation GmbH & Co. KG CANopen Compact Bus Terminal Controller, BC5150
Model: BC5150
Data:
Busklemme
Programming: TwinCAT (via programming interface or fieldbus)
Program memory: 48kbytes
Data memory: 32kbytes
Remanent data: 2kbytes
Runtime system: 1 PLC task
PLC cycle time: approx. 3 ms for 1,000 instructions (without I/O cycle, K-bus)
Programming languages: IEC 61131-3 (IL, LD, FBD, SFC, ST)
The Bus Terminal Controllers are Bus Couplers with integrated PLC functionality. The Compact BC5150 Bus Terminal Controller for CANopen extends the Beckhoff small controller series by a cost-optimized version in a compact housing. The CANopen controller offers automatic baud rate detection up to 1 Mbaud and two address selection switches for address assignment.
The Bus Terminal Controller is programmed using the TwinCAT 2 programming system according to IEC 61131-3. The configuration/programming interface on the BC5150 is used to load the PLC program. If the software PLC TwinCAT is in use, the PLC program can also be loaded via the fieldbus. The inputs and outputs of the connected Bus Terminals are assigned in the default setting of the PLC. Each Bus Terminal can be configured in such a way that it exchanges data directly through the fieldbus with the higher-level automation device. Similarly, pre-processed data can be exchanged between the Bus Terminal Controller and the higher-level controller via the fieldbus.
Controller for distributed signal processing
The programming system TwinCAT for the BC5150 operates, independently of the manufacturer, in accordance with IEC 61131-3. The PLC programs can be written in five different programming languages (IL, FBD, LD, SFC, ST). In addition, TwinCAT offers extensive debug functionalities (breakpoint, single step, monitoring, …), which facilitate commissioning. It is also possible to perform adjustment and measurement of the cycle time.
Model: BC5150
Data:
Busklemme
Programming: TwinCAT (via programming interface or fieldbus)
Program memory: 48kbytes
Data memory: 32kbytes
Remanent data: 2kbytes
Runtime system: 1 PLC task
PLC cycle time: approx. 3 ms for 1,000 instructions (without I/O cycle, K-bus)
Programming languages: IEC 61131-3 (IL, LD, FBD, SFC, ST)
The Bus Terminal Controllers are Bus Couplers with integrated PLC functionality. The Compact BC5150 Bus Terminal Controller for CANopen extends the Beckhoff small controller series by a cost-optimized version in a compact housing. The CANopen controller offers automatic baud rate detection up to 1 Mbaud and two address selection switches for address assignment.
The Bus Terminal Controller is programmed using the TwinCAT 2 programming system according to IEC 61131-3. The configuration/programming interface on the BC5150 is used to load the PLC program. If the software PLC TwinCAT is in use, the PLC program can also be loaded via the fieldbus. The inputs and outputs of the connected Bus Terminals are assigned in the default setting of the PLC. Each Bus Terminal can be configured in such a way that it exchanges data directly through the fieldbus with the higher-level automation device. Similarly, pre-processed data can be exchanged between the Bus Terminal Controller and the higher-level controller via the fieldbus.
Controller for distributed signal processing
The programming system TwinCAT for the BC5150 operates, independently of the manufacturer, in accordance with IEC 61131-3. The PLC programs can be written in five different programming languages (IL, FBD, LD, SFC, ST). In addition, TwinCAT offers extensive debug functionalities (breakpoint, single step, monitoring, …), which facilitate commissioning. It is also possible to perform adjustment and measurement of the cycle time.
Wichtiger Hinweis:
Im Lieferumfang enthalten sind nur Artikel und Zubehör, welche auch ausdrücklich in der Artikelbeschreibung aufgelistet oder auf den Fotos zu sehen sind. Sollten Sie Fragen zu Artikeln haben oder weitere Fotos benötigen, kontaktieren Sie uns bitte vor der Kaufbestätigung.
进一步的链接至 "BECKHOFF BC5150, CANopen Compact Bus Terminal Controller"